Italian Marble Damage Guide · Bangalore 2026

Italian Marble Scratches & Etch Marks: Can They Be Removed Without Replacing the Marble?

Q: Can an etch mark be cleaned away?

No. Etching changes the finish itself and usually requires mechanical refinishing or repolishing.

Q: How are deep scratches removed from marble?

Deep scratches are typically corrected by starting with a sufficiently coarse honing stage and progressing through finer abrasives before final polishing.

Q: Does marble sealer stop scratches?

No. Penetrating sealers primarily improve stain resistance and do not make marble scratch-proof.

Q: Does marble sealer prevent etching?

No. Penetrating sealers do not prevent the acid reaction that causes marble etching.

Fine scratches, dull rings, cloudy patches and deeper marks can make premium Italian marble look permanently damaged. In many cases the marble can be restored in place using controlled honing, polishing, local repair and suitable protection. But scratches, etching, chips, cracks and slab movement are different problems. This guide explains what can usually be corrected, what needs deeper restoration, and when replacement should actually be considered.

Show Floorzy the Damage Explore Marble Solution Wing

Quick Answer

Many scratches and etch marks on installed Italian marble can be corrected without removing or replacing the slabs. Floorzy’s current Marble Solution Wing treats scratch and etch correction as an in-place restoration service and states that installed marble in completed homes does not automatically need replacement. [1]

Natural-stone industry guidance supports the same distinction. The Natural Stone Institute states that slight surface scratches may be buffed, while deeper scratches and nicks should be professionally repaired and repolished. Laticrete publishes staged honing products for mild-to-deep scratches and extra-fine stages for light scratches and etch marks. [20] [22]

Replacement becomes a different conversation when the damage is through-depth, the slab is unstable, large pieces are missing, structural movement is continuing, or previous repairs cannot produce an acceptable finish. Cosmetic wear and finish damage alone do not automatically mean the marble has reached end of life.

Light ScratchUsually surface-level and often restorable through controlled refinement.

Etch MarkChemical finish damage caused by acid-sensitive marble reacting with acidic substances.

Deep Scratch / ChipMay need coarser honing, local repair or filler before final polishing.

Structural CrackNeeds movement and slab assessment before cosmetic refinishing.

The key is to identify how deep the damage goes and whether the slab is stable. A dull lemon-juice ring on a polished dining floor is fundamentally different from a crack caused by substrate movement. One is surface chemistry; the other may involve the installation beneath the marble.

Start With the Right Diagnosis

What Is the Difference Between a Scratch, an Etch Mark and a Crack?

Homeowners often use the word “scratch” for every visible line or dull mark. For restoration, that is too broad. The treatment changes depending on whether material has been abraded, chemically dissolved, chipped or structurally separated.

Condition	What It Is	Typical Appearance	Likely Direction
Fine surface scratch	Shallow abrasion in the polished finish	Thin line visible mainly in side lighting	Fine honing / polishing assessment
Deep scratch	Groove extending below the top polished layer	Visible from several angles; may catch a fingernail	Coarser honing through progressively finer stages
Etch mark	Acid has reacted with the marble surface	Dull ring, cloudy patch or matte splash shape	Mechanical refinishing / repolishing
Chip / nick	Small piece of stone is missing	Edge damage or local pit	Repair/fill + finish blending
Crack	Physical fracture through the stone	Line can continue across depth or slab	Assess movement, then repair if suitable
Lippage	Adjacent slabs sit at different heights	Raised edge catches light or foot traffic	Grinding/levelling assessment, not simple polish

The Natural Stone Institute specifically distinguishes etch marks from stains and scratches, and advises professional refinishing for etched areas that cannot be corrected by light buffing. It also states that deeper scratches and nicks should be professionally repaired and repolished. [20] [21]

Etching

Why Does Italian Marble Get Dull Rings and Cloudy Etch Marks?

Marble is a calcareous stone and is sensitive to acids. Foods and liquids such as citrus, wine, vinegar and some cleaners can react with the polished surface. Laticrete explains that acidic substances etch marble and that a penetrating sealer cannot stop this chemical reaction. The result is a dull patch because the surface itself has been altered. [23] [24]

This is why an etch mark cannot simply be “cleaned away.” If the surface has been chemically roughened, stronger cleaning can make the damage worse. Laticrete’s FAQ states that etching is properly repaired through mechanical refinishing rather than by applying a topical coating over the mark. [23]

Common etch sources in homes

Lemon, lime and other citrus juice.
Wine and some soft drinks.
Vinegar-based cleaning.
Bathroom descalers and toilet cleaners.
Tomato products and acidic foods.
Some cosmetics and household cleaning products.
Improvised rust or stain-removal chemicals.

On highly polished Italian marble, even very shallow etching can look dramatic because the affected patch loses mirror-like reflection. The actual material loss may be shallow, but visually it can appear as a large white or grey stain.

Premium Italian marble surface with polished finish suitable for etch mark restoration — Etching changes the finish itself. The restoration goal is to rebuild consistent reflection, not merely clean the mark.

Scratch Depth

Can Deep Scratches Be Removed From Italian Marble?

Often, yes—but deeper scratches require more than a final polishing step. The damaged layer has to be reduced enough for the scratch to disappear or become visually acceptable, then the surface is rebuilt through progressively finer stages.

Laticrete’s professional honing system makes the logic easy to understand. It publishes 180 grit for deep scratches, 280 for mild-to-deep scratches, 400 for mild scratches, 600 for light-to-mild scratches and 800 for light scratches and etch marks. That does not mean every contractor must use exactly those products; it demonstrates the restoration principle that the starting abrasive stage depends on damage depth. [22]

A technician should avoid starting coarser than necessary because every coarse stage removes more material and creates its own scratch pattern that must then be refined. But starting too fine can waste time and leave the original deep scratch visible.

What changes the scratch-repair method?

Whether the scratch is visible only in side lighting or from every angle.
Whether a fingernail catches in the groove.
How large the scratched area is.
Whether the marble is polished or honed.
Whether the scratch crosses resin-filled veins or repaired areas.
Whether the floor has lippage that also needs correction.
How uniform the surrounding polish is.
Whether the client expects spot correction or full-room uniformity.

Floorzy’s current Marble Solution Wing positions scratch and etch correction as condition-specific work. That is important because a few local scratches may be treated differently from a complete living room where every traffic lane has lost clarity. [1]

Honing vs Polishing

What Is the Difference Between Honing and Polishing Marble?

Honing and polishing are related but not identical. Honing is the abrasive refinement stage used to flatten, correct and progressively smooth the stone. Polishing is the later stage that develops the desired sheen or polished appearance after the surface has been adequately refined.

Laticrete’s honing guidance explicitly says its honing powders create an even, flat finish and prepare marble for polishing and shining. Its polishing product was designed to follow honing and correct etch marks or light wear before developing a smoother finish. [22] [25]

HoningCorrects surface damage, scratch patterns and uneven finish through abrasive refinement.

PolishingBuilds clarity and shine after the underlying surface is sufficiently refined.

GrindingUsed for deeper correction, significant lippage or severe damage when honing alone is not enough.

This is why a one-step “polish” may improve gloss but leave visible scratches underneath. If the defect is deeper than the polishing stage can correct, the surface must be taken back to the appropriate honing level first.

Lippage & Uneven Slabs

When Does Italian Marble Need Grinding Instead of Simple Polishing?

Grinding becomes relevant when the problem is not only finish loss but surface geometry. If adjacent marble slabs sit at different heights, a machine cannot create a uniformly flat reflection simply by polishing the higher and lower surfaces independently.

Common reasons grinding may be considered include:

Noticeable lippage between neighbouring slabs.
Deep scratches that extend below normal honing correction.
Severe construction damage.
Uneven old restoration where some areas are higher than others.
Raised repair material or badly finished joints.
Widespread wear that requires resetting the surface before polishing.

Grinding is a more invasive stage because it removes more stone. It should therefore be justified by the condition and performed in a controlled sequence. Floorzy’s broader restoration positioning is useful here because it allows the service to move beyond “shine recovery” when the floor requires real correction. [1]

Grinding is not automatically better. If the floor is already flat and only has light etching, unnecessary aggressive grinding removes more marble than required and increases the amount of refinishing needed afterwards.

Chips & Small Damage

Can Chips, Nicks and Small Defects Be Repaired Without Replacing the Slab?

Often, yes. Small chips, pinholes and local edge damage can frequently be repaired using colour-matched or compatible repair materials, followed by refinishing so the repair blends with the surrounding marble.

The Natural Stone Institute’s maintenance guidance notes that cracked or damaged natural stone can often be repaired rather than automatically discarded. Its industry literature discusses restoration techniques using compatible repair materials and subsequent grinding/refinishing. [26] [27]

Floorzy’s Marble Solution Wing also lists crack and joint repair as a dedicated service alongside polishing. That distinction is useful: the repair rebuilds missing or separated material, while polishing restores the surrounding finish. [1]

A professional chip repair should consider:

Location of the chip—middle of slab, edge, step or threshold.
Depth and width.
Whether the surrounding stone is stable.
Colour and translucency of the marble.
Veining pattern and visual expectations.
Whether the area receives impact or movement.
How the repair will be refinished and blended.

No repair is literally invisible in every light and every stone, especially on highly translucent or strongly veined marble. A test or sample expectation is therefore valuable for premium surfaces.

Cracks

When Is a Marble Crack a Surface Repair—and When Is It a Bigger Problem?

A visible crack is not automatically the same as a scratch. The important question is whether the crack is stable and localised or is being driven by movement below the slab.

A hairline crack in one piece of otherwise stable stone may be repairable. A crack that continues across multiple slabs, opens and closes, shows vertical displacement or follows a moving substrate joint deserves deeper assessment before cosmetic repair.

Warning signs that need more than polish

The crack crosses several slabs in a straight line.
One side is higher than the other.
The crack keeps reopening after previous filler repairs.
Adjacent grout or joints are also breaking.
The slab sounds hollow or moves under load.
The crack is associated with structural settlement or substrate movement.
Large fragments are loose.

Floorzy’s current Marble Solution Wing says repair methods should be matched to the actual stone condition. That prevents a finish-only solution being applied to a defect that is actually movement-related. [1]

Where significant building or substrate movement is suspected, a stone-restoration contractor may need to coordinate with the relevant civil, structural or waterproofing specialist rather than pretending a resin fill will permanently stop the cause.

Sealer Expectations

Can a Marble Sealer Prevent Scratches or Etch Marks?

No. Penetrating sealers are mainly used to reduce absorption and improve resistance to water- or oil-borne staining. They do not create an invisible scratch-proof or acid-proof shield over the marble.

Laticrete’s FAQ states that penetrating sealers cannot provide protection against acid etching. The Natural Stone Institute similarly describes impregnating sealers as stain-resistance treatments rather than products that make stone completely impervious. [23] [28]

This distinction matters because some homeowners believe a protected marble surface should never show lemon rings, scratches or wear. Protection can help with absorption, but it cannot change the basic mineral chemistry of marble or prevent grit from physically scratching a polished surface.

Protection can help with:

Reducing absorption of common liquids where the stone benefits from treatment.
Providing more time to clean some spills.
Reducing some water/oil staining vulnerability.
Supporting easier maintenance of a restored surface.

Protection cannot guarantee:

No scratches from sand, grit or dragging furniture.
No etching from acidic substances.
No structural cracking.
No lippage or movement.
No future maintenance.

Floorzy’s current positioning is strongest when protection is described as one part of restoration—not as a replacement for correct cleaning, furniture protection or spill management. [1]

Restore or Replace?

How Do You Decide Whether to Restore Italian Marble or Replace It?

Replacement should not be the automatic answer simply because the marble looks scratched, dull or chemically damaged. Premium marble is often selected precisely because it can be mechanically refinished and restored. If the slab remains stable and serviceable, restoration may preserve the existing stone, avoid demolition and reduce disruption.

Floorzy’s current Marble Solution Wing explicitly states that already-installed marble does not automatically need removal. The team assesses the visible problem, stone condition, exposure and repair requirements before recommending restoration, treatment or another solution. [1]

Condition	Restoration Often Makes Sense	Replacement / Deeper Review May Be Needed
Light scratches	Yes—controlled honing/polishing can often restore the finish	Rarely requires replacement by itself
Etch marks	Yes—mechanical refinishing is a standard restoration route	Replacement is unusual unless damage is combined with other major defects
Deep scratches	Often—if sufficient stone thickness and finish correction are available	Consider other options if damage is extremely deep or widespread through fragile slabs
Small chips	Often repairable and blendable	Large missing sections or unstable edges may justify replacement
Stable local crack	May be repairable after assessment	Movement-related cracks need the underlying cause addressed first
Broken / loose slab	Limited	Replacement may be more appropriate if the slab is structurally unsound
Severe substrate movement	Cosmetic restoration alone is not enough	Underlying movement must be corrected before final stone decision

For a premium apartment or villa, this decision also has practical value. Removing marble can disturb skirting, furniture, doors, waterproofing, adjacent slabs and existing interiors. In-place restoration can often be significantly less disruptive when the stone itself is suitable to retain.

Spot Repair vs Full Room

Can One Scratch or Etch Mark Be Repaired Locally?

Sometimes. Local restoration can work well when the damaged patch is small, the surrounding polish is still consistent and the technician can blend the repaired area into the existing finish.

However, highly polished Italian marble behaves almost like a reflective surface. If the rest of the floor has aged, worn or changed gloss, a newly restored spot can look noticeably different even though the mark itself has been corrected. This is why professional restoration often evaluates a larger blending zone rather than treating only the exact outline of the defect.

Local repair is more likely to work when:

The damage is small and isolated.
The surrounding surface is still in good condition.
The floor is flat and uniform.
The marble colour and finish can be blended predictably.
No stain or moisture problem is involved.

A wider restoration may be better when:

There are many etch marks across the room.
Traffic lanes have lost gloss.
Spot repairs from earlier work already look patchy.
The floor contains scratches at several depths.
There is widespread construction haze or abrasive wear.
The client expects one uniform premium reflection.

Floorzy’s test-before-you-decide approach can help set this expectation. A controlled area shows both the corrected damage and how the restored finish compares with the surrounding marble before the full scope is approved. [1]

Common DIY Mistakes

What Should You Avoid When Trying to Remove Marble Scratches or Etch Marks Yourself?

Many restoration enquiries begin after the homeowner has tried a household cleaner, abrasive powder or improvised polishing method. Some minor marks can be managed safely with appropriate stone-care products, but premium Italian marble is easy to make visually worse when the treatment is uneven.

Avoid these common mistakes:

Using vinegar, lemon or acidic cleaners on marble.
Scrubbing with abrasive pads or scouring powders.
Using random sandpaper on one small spot.
Applying wax or topical coating to hide an etch mark.
Using strong rust or bathroom chemicals without checking stone compatibility.
Grinding one patch aggressively without matching the surrounding finish.
Assuming a sealer will restore missing polish.
Dragging furniture over freshly restored marble.

The Natural Stone Institute warns that acidic products can dull or etch calcareous stone and that abrasive powders can scratch stone surfaces. Laticrete likewise says professional refinishing is the best permanent correction for etch marks because the finish itself has been altered. [21] [24]

If you can feel the scratch with your fingernail, if the damaged area is large, or if the marble is expensive and highly polished, stop experimenting. A small test by a stone-restoration professional is usually less risky than creating a larger mismatched patch.

Preventing New Damage

How Do You Stop Italian Marble From Getting Scratched Again?

Restoration can remove or reduce existing damage, but future scratches are largely controlled by use and maintenance. The Natural Stone Institute notes that sand, dirt and grit are abrasive and recommends frequent dust mopping and entrance mats to reduce scratching. [21]

Floor protection habits that matter

Use clean entrance mats to trap sand and grit.
Dust mop frequently with a clean, non-treated mop.
Fit felt or suitable protective pads under furniture legs.
Lift heavy furniture instead of dragging it.
Check vacuum wheels and attachments for hard or damaged edges.
Use stone-compatible routine cleaners.
Clean spills quickly rather than allowing acidic liquids to sit.
Use coasters on marble tables and counters.
Review protective treatment where it is technically appropriate.

Floorzy’s current maintenance positioning also emphasises preserving the restored result rather than treating polishing as a one-time event. The longer-lasting result comes from combining restoration with the right protection and care plan for the space. [1]

Occupied Homes

Can Italian Marble Be Restored in a Fully Furnished Apartment or Villa?

Often, yes. Floorzy’s Marble Solution Wing is specifically designed for already-installed marble in completed homes, hotels, restaurants and commercial spaces. The page states that removal is not assumed to be necessary when the stone can be treated in place. [1]

In occupied homes, the restoration plan must account for more than the marble itself. Furniture, walls, woodwork, doors, residents, working hours, water access and room-by-room sequencing can all affect execution.

An occupied-home plan may include:

Moving and protecting furniture by zones.
Completing one room or area before opening the next.
Protecting skirting, walls and adjacent finishes.
Using professional equipment and controlled slurry/dust management.
Keeping residents away from active machine areas.
Allowing sufficient drying or protection-treatment cure time.
Returning furniture only after the surface is ready.

This is one of the strongest reasons to assess restoration before demolition. If the installed marble can be retained, the client may avoid breaking and replacing a premium finished floor throughout an occupied property.

Luxury occupied home with restored Italian marble flooring — For structurally serviceable marble, in-place restoration can preserve the original floor and reduce disruption in occupied premium interiors.

Bangalore / Bengaluru

Where Do Italian Marble Scratches and Etch Marks Commonly Appear in Bangalore Homes?

Premium Italian marble is used across Bangalore in living rooms, foyers, bedrooms, staircases, dining areas, bathrooms, tabletops and luxury common spaces. The damage pattern often follows how each space is used.

Living RoomsFurniture movement, sand/grit and traffic can create fine scratches and worn lanes.

Dining AreasCitrus, wine, coffee and food spills can create etch marks or stains on floors and tabletops.

BathroomsAcidic descalers, hard-water cleaning and repeated moisture exposure can damage polished marble.

Staircases / FoyersConcentrated traffic and grit can create repetitive wear and edge damage.

For local SEO, this article targets search behaviour that is more specific than generic “marble polishing Bangalore.” Someone searching “Italian marble scratch repair Bangalore,” “acid marks on marble floor,” or “dull patches on Italian marble” already knows they have a visible defect. The conversion opportunity is to explain the damage correctly and route the visitor into a Floorzy restoration assessment.

Treatment Workflow

What Does a Professional Scratch and Etch Restoration Process Look Like?

The exact sequence depends on damage depth, marble type, room layout and the finish target, but a professional process usually follows a logical progression from inspection to controlled correction and final maintenance.

Step 1 — Inspect the floor dry and in side lighting

Side lighting makes fine scratches, swirls and dull patches easier to see. The technician checks whether the defect is only in the finish, whether it catches a fingernail, whether it crosses repaired veins, and whether neighbouring slabs are level.

Step 2 — Separate stains from etching

A stain is contamination within or on the stone. An etch mark is damage to the polished surface. The Natural Stone Institute treats these as separate problems because stain-removal chemistry and finish restoration are not interchangeable. [20]

Step 3 — Select the starting restoration stage

Light etching may need only fine correction and repolishing. Deeper scratches require a coarser honing stage before moving progressively finer. Laticrete’s published honing sequence illustrates this staged approach, with different grit levels assigned to deeper versus lighter scratches. [22]

Step 4 — Correct chips or joints where required

Local missing material or unstable filler is addressed separately so the repaired area can be blended into the final surface.

Step 5 — Rebuild the finish

Once the defect has been removed or reduced to the agreed level, the marble is progressively refined and polished until the target finish is reached. The aim is not merely to create shine—it is to create consistent reflection across the restored area.

Step 6 — Protect where technically suitable

If the marble benefits from penetrating protection, it can be applied after the surface is properly prepared and dry. Protection can reduce absorption but does not prevent acid etching or physical scratching. [23] [28]

Step 7 — Explain maintenance

The client should know what cleaners to use, which products to avoid, how to manage spills, and how to prevent furniture and grit from damaging the restored floor again.

Floorzy’s current Marble Solution Wing follows the same broader logic: restore the visible problem, treat the stone condition, protect where appropriate and define how the result should be maintained. [1]

What to Send Floorzy

What Photos Help Floorzy Assess Marble Scratches and Etch Marks?

A straight-on photo often hides scratches. The most useful first assessment includes both direct and side-angle images so the team can see how light reflects across the damage.

One full-room photo showing the complete marble area.
One close-up of the worst scratch or dull spot.
One photo taken from a low angle with light reflecting across the floor.
A photo showing any crack, chip or open joint.
Marble type if known: Statuario, Carrara, Botticino, Indian marble, etc.
Approximate age of the installation.
Approximate affected area in sq.ft.
Whether the scratch catches a fingernail.
Any cleaner or chemical used before the mark appeared.
Whether the floor has been polished or coated previously.
Whether furniture is installed and the property is occupied.
Bangalore / project location.

If possible, send a short video moving the phone sideways across the reflection. Etch marks, swirls and fine scratches often become much easier to identify when the light moves across the surface.

Italian Marble / Scratch & Etch

Before You Replace the Marble, Let Floorzy Assess the Surface

Send clear photos of the damaged area, the marble type if known, your location and approximate area. Floorzy can review whether the problem looks suitable for honing, polishing, local repair, broader restoration or a deeper slab/installation assessment.

Request a Marble Assessment View Marble Solution Wing

Buyer Checklist

What Should a Scratch or Etch Repair Quote Clearly Explain?

Marble type and current finish.
Whether the visible problem is scratch, etch, crack, chip or lippage.
Approximate damage depth.
Whether spot correction or full-area restoration is proposed.
Whether grinding is required.
Honing/polishing stages or process description.
Crack, chip and joint repair scope.
Stain treatment if any contamination is also present.
Edge and skirting treatment.
Furniture and access responsibility.
Protection/sealing scope if included.
Expected finish and test-area approval.
Drying or curing restrictions.
Maintenance instructions after completion.
What cannot be guaranteed, such as structural movement or extremely deep damage.

A vague quote saying only “marble polish” does not tell the customer whether the actual defect is being corrected. The stronger quote explains what the problem is, what material will be removed or repaired, what finish is expected and what remains outside the scope.

AEO Answers

Italian Marble Scratches & Etch Marks — Frequently Asked Questions

1. Can scratches be removed from Italian marble without replacing it?

Many surface and moderate scratches can be reduced or removed through professional honing and polishing. Deeper or structural damage needs separate assessment, but replacement is not automatically required.

2. What is an etch mark on marble?

An etch mark is a dull or cloudy area where an acidic substance has reacted with the marble surface. It is finish damage rather than ordinary dirt.

3. Can an etch mark be cleaned away?

No. Cleaning can remove residue or stains, but an etched surface usually needs mechanical refinishing or repolishing because the finish itself has been altered.

4. Can lemon or vinegar damage Italian marble?

Yes. Marble is acid sensitive, and acidic foods or cleaners can dull or etch polished marble.

5. How are deep scratches removed from marble?

Deep scratches are usually corrected by starting with a sufficiently coarse honing stage and progressing through finer abrasives before polishing the surface again.

6. Will polishing alone remove deep scratches?

Not always. Final polishing may improve shine but deeper scratches can remain unless the surface is honed or ground deeply enough to remove the damaged layer first.

7. What is the difference between honing and polishing?

Honing is the abrasive refinement used to correct scratches and create an even surface. Polishing follows the refinement stages to develop the desired shine or clarity.

8. Can a chipped marble edge be repaired?

Small chips can often be filled or repaired and then blended into the surrounding finish, depending on stone, location and visual expectation.

9. Can a cracked marble slab be repaired?

Some stable local cracks can be repaired, but cracks associated with continuing substrate or structural movement require the underlying cause to be assessed first.

10. Does marble sealer stop scratches?

No. Penetrating sealers mainly reduce absorption and improve stain resistance. They do not make marble scratch-proof.

11. Does marble sealer prevent etching?

No. Penetrating protection cannot stop the chemical reaction between acids and acid-sensitive marble.

12. When does marble need replacement instead of restoration?

Replacement may be considered when slabs are structurally unstable, severely broken, missing large sections, moving significantly or damaged beyond an acceptable restoration result.

13. Can Floorzy restore marble in an occupied apartment?

Yes. Floorzy’s Marble Solution Wing is designed for installed marble in completed and occupied properties, with execution planned around the actual treatment and site conditions.

14. How can I show Floorzy a scratch properly?

Send a close-up plus a low-angle photo or short video with light reflecting across the floor. This makes scratch depth and finish damage easier to see.

15. Does Floorzy provide Italian marble scratch and etch repair in Bangalore?

Floorzy’s Marble Solution Wing includes scratch and etch correction, restoration, polishing, repairs and suitable protection for installed marble in Bangalore, subject to the actual stone and site condition.

Scratched Marble Does Not Automatically Mean New Marble

First determine whether the damage is in the finish, inside the stone or being caused by movement below it. Floorzy can assess the condition, test the restoration where suitable and define whether the existing marble can be retained and restored.

Get a Floorzy Assessment Call +91 89517 65671

Evidence & Citations

Sources Used for This Italian Marble Scratch & Etch Guide

Floorzy-specific statements are based on currently published Floorzy pages. External references support general natural-stone principles around scratching, etching, honing, polishing, repair, maintenance and protection. They are not Floorzy-specific product certifications.

Call Us